fbpx

PALLAS Water Softener
06/30/2020
Hydra Mono Water Softener
06/30/2020
Show all

PRIMO Water Softener

PRIMO Water Softener, is installed on the main water supply pipe. PRIMO is equipped with an automatic, electronic time-volume control valve equipped with by-pass. The maintenance-service is intuitive and limited to salt refill only.

BENEFITS AND ADVANTAGES:
Italian Design.
Easy to operate.
Resin volumes 12.20 and 25 liters.

Click Here to Request a Free Quote

For any assistance or question you may have, feel free to contact us on 7000 2373 or email us on [email protected] Our team of experts will be more than happy to assist you.

Category:
PRIMO Water Softener, is installed on the main water supply pipe. PRIMO is equipped with automatic, electronic time-volume control valve equipped with by-pass. The maintenance-service is intuitive and limited to salt refill only.
Main Problems of Hard Water
  • Precipitation in pipes, accessories and equipment.
  • Precipitation in electrical resistances.
  • Increase of energy consumption because of isolation.
  • More use of soap and chemical products.
  • Reduction of the electronical device’s lifetime
  • More need of maintenance.

Advantages of PRIMO Water Softener

  1. Reduces water hardness
  2. Automatic, electronic time-volume control valve equipped with by-pass
  3. Aesthetic, durable housing
  4. Maintenance-free device (labour limited to salt refill)
  5. Intuitive service
  6. Detailed instruction manual
  7. Easy to operate
  8. Handles for easy portability
  9. High quality materials guarantee long and fault-free operation
  10. Affordable price
  11. Available resin volumes: 12,20 and 25 litres

RECOMMENDED Installation for PRIMO Water Softener

Catalogue No. WS-12-C-1650-PRIMO WS-20-C-1650-PRIMO WS-25-C-1650-PRIMO
Type PRIMO – compact
Maximun flow 1 m3/h 1.7 m3/h 2.3 m3/h
Nominal flow 0.8 m3/h 1.2 m3/h 1.2 m3/h
Resin volume 12 l 20 l 25 l
Exchange capacity 340  dH x m3 570  dH x m3 710 dH x m3
Average water consumtion for regeneration 80 l 105 l 160 l
Average salt consumtion for regeneration 1.8 kg 3 kg 3.8 kg
Dimensions (W/D/H) 32/50/67 cm 32/50/114 cm 32/50/114 cm
Tank dimensions (OD/H) 10″ / 17″ 8″ / 35″ 10″ / 35″
Weight 18 kg 30 kg 33 kg
Working pressure 2-8 bar
Working temperature 4-30 °C
Power supply, voltage AC 220-240 V; 12 V (650 mA)
Power consumtion 5 W (during regeneration mode only)
Connection 1″
Suggested number of people (depends on water hardness) 1 up 3 up 4